Digital
this site the web

How to install java games on Samsung E250

Software Needed:

Note: If you have no software listed below then visit the provided link.

1. Java uploader. http://www.giveawayoftheday.com/freeware/java/uploader
2. SoftickPPP. http://www.softick.com/download.php
3. Jad maker for those games and apps downloaded as jar files only.
4. The jad and jar files of the game.http://www.getjar.com/


Having these things ready, we may now start with the installation of

Softick. But before that, just to make our job easier, be sure to

instal your samsung pc studio 3.0 software in your pc. Connect your

phone to the usb cable and select modem for USB settings. Shut down the

samsung pc studio leaving your phone still connected. Now, you will

need to know to what com port is your phone connected by clicking Start

menu, Control Panel, Printers and Other Hardware and then click on

Phone and Modem options. A window for the Phone and Modem Options will

pop then select on the modems tab. After doing that look for the

Samsung mobile USB Modem ... and note down the Com port that you will

see. Com port for different users varies like it would say COM 4 for

you and COM 5 for me.) After noting your Com port, close the Phone and

Modem options window pane by clicking OK.

You may now proceed with installing SoftickPPP. By following these

steps.


Softick Installation and Settings:

1. Run your downloaded SoftickPPP installer. It could be of the same

version with Mr. Afzal's or not.
2. Just agree on all the terms of installing varying nothing until you

get to a message saying " A path to Palm Desktop cannot be..." press

the OK button.
3. In the USB Sharing mode, select "Use USB port in exclusive mode" and

press the Next button.
4. Then Press the next Button again to the "Completing the Softick PPP

setup Wizard" and press Finish to complete installation.

That would finish your installation of the SoftickPPP. Next step is to

configure it.

===========================
SoftickPPP Configuration:
===========================
1. In system tray, lower right corner of your screen, you will see the

Softick icon. Right click on it's icon and go to Settings,

Bluetooth/Serial.
2. Put a check on the COM port with the (/Device/ss_mdm0) device.
3. Click on its properties and you should see a port speed of 1:5200

bps and a Flow control of Hardware. Press OK.

You are now done with configuring your Softick. Next step is to create

a network connection on your PC.

====================================
Creating a New Network Connection:
====================================
1. Click on Start Menu.
2. Click on Control Panel.
3. Click on Network and Internet Connections.
4. Click on Network Connections.
5. Click on Create a New Connection to start the New Connection Wizard.
6. On the New Connection Wizard window press next.
7. Click on "Setup and advanced Connection" and then press next.
8. Clock on "Connect directly to another computer" and then press next.
9. Click on "Host" and then press next.
10. Select Connection device COM1 and then press next.
11. Select USers like Administrator and your windows account name and

then press next.
12. Press finish to complete the Process.

The Next step is to configure the Incoming Connections.


Incoming Connections Configuration:

1. Click on Start Menu.
2. Click on Control Panel.
3. Click on Network and Internet Connections.
4. Click on Network Connections.
5. Right Click on Incoming Connections and choose properties.
6. Under General Tab, there should only be one check on incoming

connections which is Communications cable between two computers ( COM1

) and click on it's properties.
7. Set Port Speed to 115200 and press OK.
8. Click on Users Tab.
9. Put a check on "Always allow directly connected devices..."
10. Click on Networking Tab.
11. Click on Internet Protocol (TCP/IP) and then go to its Properties.
12. Click on Specify TCP/IP Addresses
13. Input 192.168.50.1 in "From".
14. Input 192.168.50.2 in "To" and then press OK.


That ends the installation and configurations. Next thing to do is to

run the SoftickPPP. Activate PPP by right clicking on the SoftickPPP

icon in System tray and choose "Activate PPP". An "Unable to locate

required library" window message will pop, Click on cancel to ignore

the message. To check if your phone is successfully connected, place

the mouse cursor on the Softick PPP icon. It should display a

"SoftickPPP: 1 device(s) connected PPP is enabled.


Start of the Installation:

1. Run your Java Uploader.
2. Select the game you want to install. ( remember to put the jad and

jar file of the game in one folder.)
3. Enter *#52828378# on the phone to access the Java Test Menu.
4. Choose OTA type setting, choose Serial bearer OTA. Press select.

(change this back to GPRS bearer OTA after all java installation.)
5. Still under Java Test Menu, Select "Serial Test".
6. Select "PPP Up".
7. Select "USB".
8. Select "Serial Download". The Java spals Screen will appear with a

progress bar. After the progress bar had finished, the game will start

automatically.
9. change back OTA type setting to GPRS bearer OTA after all java

installations. Ensure that you do this to be able to use GPRS or EDGE

features on your phone.


From personal experiences we tell you that after installation your

phone may saty unstable for
a long time, though you will be able to carry out normal operations,

your phone may hang and
crash sometime.This problem usually persists for 1 week post

installation.After which crashes
will not take place.

Happy gaming!!!





0 comments:

Post a Comment

 

W3C Validations

Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Morbi dapibus dolor sit amet metus suscipit iaculis. Quisque at nulla eu elit adipiscing tempor.

Usage Policies